2024 Aluminum Extrusion2022-10-05T07:25:40+00:00

2024 Aluminum Extrusions

FONNOV ALUMINIUM produce and supply 2024 aluminum extrusions with below shapes:

  • Custom 2024 T3 T351 T8 T851 aluminum extrusions
  • 2024 T3 T351 T8 T851 aluminum rods
  • 2024 T3 T351 T8 T851 aluminum bars (round bar, square bar, rectangular bar, etc.)
  • 2024 T3 T351 T8 T851 aluminum tubes
2024 aluminum rod round bar- fonnovaluminium

The Benefit From 2024 Aluminum Extrusions

  • The alloy for 2024 aluminum extrusion is aluminum, copper, and magnesium alloy.

Copper makes 3.8% – 4.9% and has the second highest composition after the dominant aluminum, and magnesium then follows. This composition plays an important role in forming the 2024 aluminum’s strength qualities.

ALUMINIUM ALLOY Si Fe Cu Mn Mg Cr Zn Ti Zr Others Al
2024 0.5 0.5 3.8-4.9 0.3-0.9 1.2-1.8 0.1 0.25 0.15 —— totally 0.15 reminder

✣All compositions are in percent.

  • Here is the tangible property of the 2024 aluminum.
Aluminium Alloy Thermal Coefficient of Expansion
(20-100℃)
μm/m·k
Rm/Mpa
Melting Point
(℃)
Rp0.2/Mpa
Conductivity
20℃(68℉)
(%IACS)
Resistivity

20℃(68℉)
Ωmm2/m

Density
(20℃)(g/cm3)
Ωmm2/m
2024 22.9 502-638 30 0.057 2.73

The 2024 aluminum has a fair machinability rating and good workability. In addition, its excellent strength rating makes it the most suitable for aerospace designs. Just like any other alloy, this one too has weaknesses. The 2024 aluminum has poor corrosion resistance and weldability. But these shortfalls do not affect the selection process.

  • 2024 aluminum is one of the strongest aluminum alloy. It provides stronger and more durable properties in use.
  • 2024 aluminum is widely used in aircraft structure, rivets, truck wheel hub, propeller components and other structural parts.
  • 2024 aluminum is with high strength and heat resistance.
  • 2024 aluminum parts can be used below 125°C. The 2024 aluminum is even stronger than 7075 aluminum at temperatures above 125°C.

Due to its desirable mechanical properties, the 2024 aluminum is applied in most industries today. From its high strength, to high resistance to pressure, the 2024 aluminum alloy continues to impress manufacturers and thus preferred over other aluminum alloys.

What can FONNOV bring you on 2024 Aluminum Extrusions?

▹Custom 2024 Aluminum Extrusions & 2024 Aluminum Tubes

The 2024 aluminum is not a regular material for custom extrusion products. 2024 aluminum is a hard alloy, but still can be extruded.

Aluminium Alloy & Temper Thickness

mm

Tensile Strength
Rm/Mpa
Yield Strength
Rp0.2/Mpa
Elongation /%

A

HBW
2024-T3, 2024-T3511 ≤15.00 395 290 8 120
2024-T3, 2024-T3511 >15.00-50.00 420 290 8 150
2024-T8, 2024-T8511 ≤50.00 455 380 5 130

✣The tested value is Min.

▹2024 Aluminum Bars & 2024 Aluminum Rods

Round bars, square bars are widely used in various industries. The 2024 aluminum round bars (2024 aluminum rods), 2024 aluminum flat bars are mainly with 2024T3, 2024T3510, 2024T3511, 2024-T8, 2024-T8510, 2024-T8511. The requested mechanical properties are as follows under the National Standard:

Aluminium Alloy & Temper Thickness

mm

Tensile Strength
Rm/Mpa
Yield Strength
Rp0.2/Mpa
Elongation /%

A

HBW
2024-T3       2024-T3511 ≤50.00 450 310 8 120
2024-T3       2024-T3511 >50-100 440 300 8 120
2024-T3       2024-T3511 >100-200 420 280 8 120
2024-T3       2024-T3511 >200-250 400 270 8 120
2024-T8       2024-T8511 ≤150 455 380 5 130
2024-T8       2024-T8511 >150-250 425 360 5 130

✣The tested value is Min.

2024 Aluminum Extrusion FAQ

2024 Aluminum vs. 7075 Aluminum2022-09-14T07:16:33+00:00

The 2024 aluminum is mainly composed of aluminum, copper and magnesium. The 7075 aluminum is mainly composed of aluminum, zinc and copper.

They are all hard alloy, and widely used in aircraft parts. But the 2024 aluminum is not common for general industries.

For more comparision, click 2024 ALUMINUM VS. 7075 ALUMINUM.

 

 

 

READY TO START A 2024 ALUMINUM EXTRUSION?

Let’s get started from your ideas.

    We will answer your EMAIL within 1 day!

    Go to Top