7075 T6 Aluminum
7075 T6 aluminum alloy is mainly used to manufacture aircraft structures and other high-stress structural parts that require high strength and high corrosion resistance, such as upper and lower wing panels and purlins. Also widely used in mold processing, mechanical equipment, fixtures and so on.
7075 aluminum alloy is aluminum, zinc and magnesium alloy. It has high strength, good mechanical properties and anode reaction. It is one of the most powerful alloys in commercial use.
✣All compositions are in percent.
7075 T6 aluminum has good plasticity after solution treatment and has good heat treatment strengthening effect. It has high strength below 150 degrees and has particularly good low-temperature strength, poor weldability, stress corrosion cracking tendency, and double aging can improve anti-SCC performance. It has lower resistance to corrosion than many other aluminium alloys, but has significantly better corrosion resistance than the 2xxx (2024, 2A12) alloys . Its relatively high cost limits its use.
|Aluminium Alloy & Temper||Thickness
✣The tested value is Min.
Here is the physical property of the aluminum alloy 7075.
|Aluminium Alloy||Thermal Coefficient of Expansion
Click How to Choose Aluminium Profiles: 7075T6 VS 6061T6 to see the differences of 6061T6 and 7075T6.
▹7075T6 Custom Aluminium Extruded Profiles For Reference
▹Any inquiries on 7075T6 aluminum extrusions, leave message ONLINE or EMAIL at firstname.lastname@example.org for your request.