7075 Aluminum Tube And 7075 Seamless Tube
FONNOV ALUMINIUM is a 7075 aluminum tube manufacturer and supplier.
- We produce and supply 7075 aluminum round tubes (7075 aluminum seamless tubes) upto OD360mm.
- We produce 7075 aluminum tubes with temper 7075-O, 7075H111, 7075-T1, 7075-T6, 7075-T6510, 7075-T6511, 7075-T73, 7075-T735, 7075-T73511.
- We provide machining services for your 7075 aluminum round tubes.
QUALITY STANDARD FOR 7075 ALUMINUM TUBES (7075 Aluminum Seamless Tubes)
The chemical composition of 7075 aluminum tubes.
ALUMINIUM ALLOY | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Others | Al |
---|---|---|---|---|---|---|---|---|---|---|---|
7075 | 0.40 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | —— | totally 0.15 | remainder |
✣All compositions are in percent.
The mechanical properties of 7075 aluminum tubes.
Aluminium Alloy & Temper | Thickness mm | Tensile Strength Rm/Mpa | Yield Strength Rp0.2/Mpa | Elongation /% A |
---|---|---|---|---|
7075-O 7075-H111 | ≤10.00 | ≤275 | ≤165 | 10 |
7075-T1 | ≤6.30 | 540 | 485 | 7 |
>6.30-12.50 | 560 | 505 | 7 | |
>12.50-70.00 | 560 | 495 | – | |
7075-T6 7075-T6510 7075-T6511 | ≤6.30 | 540 | 485 | 7 |
>6.30-12.50 | 560 | 505 | 7 | |
>12.50-70.00 | 560 | 495 | – | |
7075-T73 7075-T73510 7075-T73511 | 1.60-6.30 | 470 | 400 | 5 |
>6.30-35.00 | 485 | 420 | 6 | |
>35.00-70.00 | 475 | 405 | – |
✣The tested value is Min.
7075 ALUMINUM TUBE SIZE (SEAMLESS ALUMINUM TUBE)
(Updating…)
OD (mm) | Thickness (mm) |
---|---|
43 | 7.0 |
46 | 5.75 |
48 | 10 |
50 | 7 / 10 |
50.4 | 9.2 |
54 | 7 |
55 | 10 |
62 | 6 / 11 |
70 | 8 / 10 / 6 / 15 |
83 | 6.5 |
85 | 7.5 |
88 | 18 |
90 | 6.5 / 12 |
95 | 9 / 14 |
98 | 6 |
100 | 25 |
110 | 20 |
113 | 14 |
115 | 15 |
116 | 15.5 |
117 | 11 |
118 | 15 |
122 | 11 |
123 | 14 |
125 | 20 |
128 | 14 |
129 | 12.5 |
130 | 12.5 / 20 / 35 |
136 | 4.5 |
OD (mm) | Thickness (mm) |
---|---|
140 | 12.5 / 17.5 |
155 | 32.5 |
158 | 4 / 5 |
160 | 18 / 20 |
165 | 30 |
168 | 8 / 22 |
178 | 13 / 20 |
185 | 20 |
186 | 18 |
194 | 10 / 15 |
200 | 30 |
204 | 6.5 / 6.75 |
205 | 5 |
210 | 5 / 34 |
213 | 17.5 |
219 | 13.5 / 16 |
220 | 40 |
273 | 7 / 10 / 12.7 / 15.1 |
279 | 44 |
280 | 50 |
300 | 10 |
320 | 20 |
324 | 12 / 14.3 / 21.5 / 35.5 |
328 | 8 |
356 | 10.5 / 28 |
More Options For 7075 Aluminum Tube
Product name | 7075 tubing, 7075 t6 tube, 7075 t6 aluminum tube, 7075 aluminum tube, 7075 aluminum tubing, 7075 aluminum round tube, 7075 t6 aluminum round tube, 7075 seamless aluminum tube, 7075 aluminum seamless tube. |
Description | The 7075 aluminum tube is a type of aluminum round tube that made of aluminum alloy 7075. The 7075 aluminum round tubes are aluminum seamless tubes. |
Material | aluminum alloy 6061, 6063, 2024, 5083, etc. |
Temper | T4, T5, T6, etc. |
Finish & Color | anodizing, powder coating, sandblasting anodizing, brushed anodizing, etc. |
Length | CNC cut-to-length as per request. |
Packing | wooden frame, plywood case, shrink film. |
Application | 7075 aluminum tubes are normally used for marine, automotive, aerospace and defence, etc. |
Need CNC Machining And Fabrication On 7075 Aluminum Tubes?
We provide services including machining, CNC machining, bending, welding, laser etching of logo and series number, assembly.
Here are most of the questions related to 7075 aluminum tubes. We hope you will find the answer to your question. If not, please leave us a message.
The welding performance of 7075 aluminum is poor, we use MIG for 7075 aluminum tube welding, and we have rich experience on 7075 aluminum extrusion welding. CONTACT US for your welding request.
7075 aluminum tube is a metal tube made of 7075 aluminum alloy. 7075 aluminum tubes are extruded from 7075 aluminum alloy. The shape is hollow along its full length. When talking about 7075 aluminum tubes, we see the cross section and wall thickness are uniform.
7075 aluminum tubes are mainly used in structural engineering. Due to their lightweight and superior strength, 7075 aluminum tubes are widely used in aircraft, aerospace, and defense. The important alloying element of the 7075 aluminum tube is zinc, which is a high-strength and heat-treatable alloy. 7075 aluminum tube also has good corrosion resistance.
The temper of 7075 aluminum tubes can be 7075-O, 7075-H111, 7075-T1, 7075-T6, 7075-T6510, 7075-T6511, 7075-T3, 7075-T73510, 7075-T73511.
The shape of 7075 aluminum tubes can be round, square, rectangular, custom hollow shaped, etc.
The 7075T6 aluminum tube is a metal aluminum tube made of 7075 alloy with temper T6. The temper T6 offers 7075 aluminum tube fair machinability and corrosion resistance. The 7075-T6 aluminum tube is in high strength and it is good resistance to stress corrosion cracking. Because of its moderate toughness and excellent strength to weight ratio, the 7075T6 aluminum tubes are widely used in aircraft/aerospace/aviation.
Yes, our 7075 aluminum tubes are all 7075 aluminum seamless tubes.
Our 7075 aluminum tubes are high-strength aluminum seamless tubes by indirect extrusion manufacturing. Compared with regular extruded aluminum tubes, the 7075 aluminum seamless tube is stable on structure and properties.
There is no welding line for 7075 aluminum tube, so it is good for secondary machining.
7075 aluminum tubes and 7075 drawn aluminum tubes are commonly used in aircraft and aerospace. 7075 aluminum is a zinc alloyed aluminum and it has a superior strength. 7075 aluminum tubes are seamless. All these features make 7075 tubes suitable for structural parts. When you have a seat in an aircraft, you can find 7075 aluminum tubes as the seat back and seat beams.
Yes, we produce 7075T6511 aluminum tubes. Compared with T6 temper, T6511 aluminum is stress-relieved by stretching. 7075T6511 aluminum tubes are commonly used in aircraft and aerospace. No matter alloy composition, or mechanical properties, our 7075T6511 aluminum tubes are all beyond our National Standard, and also can meet standard AMSQQA200/11 and AMS4169.
7075 aluminum is hard,and difficult to be bent.We provide bending and secondary machining service for 7075 aluminum tubes. CONTACT US for more details of your bending request.
No, it can not. No matter hardness, tensile strength or yield strength, 7075 aluminum tube performs exceptionally better. However, 7005 aluminum has better weldability, and some bike frames are made of 7005 aluminum tubes.
What We need For Your Order or Quotation?
Related Products
Browse FONNOV Aluminium Categories
Standard & Custom Aluminum Extrusions
Custom Aluminum Extrusions For General Industries
Custom Aluminum Extrusions For Architecture